CURRENTLY IN STOCK:
The next generation of zero-turn mowers from Exmark.
Exmark Radius S-Series delivers the cut quality and durability professionals demand at an unbeatable value. Powered by Exmark engines, with Hydro-Gear integrated transmissions and up to 9 mph forward ground speed Radius improves productivity. It features our UltraCut deck technology for greater efficiency and 2018 models come with a suspended operator platform. Available with 48-, 52- and 60-inch cutting decks.Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
SPECIFICATIONS FOR MODEL # RAS708GEM523C3
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive.
Drive Tires 23 x 9.5-12 K500
Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings
Parking Brake Lever-actuated pawl brake.
Seat High back seat with foam padded seat cushion, armrests and integral safety switch
Electrical 12-volt battery with 15-amp alternator.
Engine Brand Exmark
Engine Model 708
Engine Displacement 708
Engine Series V-Twin
Fuel System Carbureted
Engine Speed 3,600 rpm
Air Filter Donaldson Heavy Duty air cleaner
Fuel Type Gas Carbureted
Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator Translucent Visual
Drive Description Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 125-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .375" thick caster yoke arms
Model Description Radius S-Series 24.5 HP* Exmark 708CC w/52” UltraCut Series 3 Deck, Susp Platform & Wide Pneum
*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blades 3 Blades at 18.00" Length
Width 64.3 in (163.3 cm)
Length 81.7 in (207.5 cm)
Height 70.2 inches (178.3 cm)